Konica Minolta bizhub C650 Print Operations page 257

Setting up the fax driver (Windows)
Specifying the user authentication settings
If the user authentication settings have been specified on this machine, you must enter a user name and
password.
Reminder
If a fax is sent using a user name or password that is not a registered account on this machine, or if a
fax is sent without selecting a user under "User Authentication", the operation is not authenticated by
this machine and the job is canceled.
If the user authentication settings are specified on this machine and the authentication operation
restriction function is in mode 2, the applicable user is locked and cannot be accessed if the
authentication information is not entered correctly.
If the user authentication settings are not specified on the Configure tab, user authentication cannot be
performed. If using the user authentication function, be sure to specify the settings on the Configure
tab. For details, refer to "Specifying the configure tab settings" on page 6-32.
1
Click the Basic tab.
2
Click the [Authentication/Account Track] button.
3
Select "Recipient User", and then enter the user name and password.
4
Click the [OK] button.
bizhub C650/C550/C451 (FE3)
10
10-15