Basic] Tab; Configuring A Custom Size - Konica Minolta bizhub 42 User Manual

8.4 Parameter details
8.4.2

[Basic] tab

Item Name
[Original Orientation]
[Original Size]
[Paper Size]
[Zoom]
[Authentication/Account
Track...]

Configuring a custom size

To send a fax of the original of a custom size, specify a paper size following the procedure shown below.
1
Select [Custom Size] from [Original Size].
The [Custom Size Settings] dialog box appears.
2
Configure the following items.
Item
Name
[Width]
[Length]
[Unit]
3
Click [OK].
bizhub 42/36
Functions
Select the orientation of the original to be sent.
Select the paper size of the original to be sent.
Select the size of the paper to be sent. If it is different from the original size
and the zoom is set to [Auto], the output image will be enlarged or reduced
to fit the size.
Select an enlarge or reduce ratio.
Click this button to specify the user name and password when [User Au-
thentication] is enabled on this machine, or the account name and pass-
word when [Account Track] is enabled on this machine.
For details on the user authentication, refer to page 8-18. For details on
the account track, refer to page 8-19.
Functions
Select a width of the custom size according to the unit you use.
Select a length of the custom size according to the unit you use.
Select a unit to be used for specifying the size.
8
8-17