Cj1M/Cj2M Specifications Comparison - Omron CQM1H Replacement Manual

1.2 CJ1M/CJ2M specifications comparison

The table below lists the major difference in specifications of the CJ1M series and CJ2M series.
Item
Number of I/O points
Program capacity
Data memory
Built-in I/O
Length of instructions
Execution LD instruction
time of
MOV instruction
instruction
Overhead processing time
Maximum Number
Connectable Units
Maximum Number of Expansion
Racks
Clock function
Dimensions (CPU Unit)
Programming software
Programmin Programming
g device dev ice
connection personal
computer
Programming
Console
CJ1M-CPU**
CPU*1: 160 points
CPU*2: 320 points
CPU*3: 640 points
CPU*1: 5k step
CPU*2: 10k step
CPU*3: 20k step
32k words
CJ2*: In:10 points/Out:6 points
1-7 steps/one instruction
0.10us
0.30us
CPU*1: 0.7ms
CPU*2/*3: 0.5ms
of CPU*1/CPU*2: 10 units
CPU*3: 20 units
CPU*1/CPU*2: No expansion
CPU*3: 1
Equipped as a standard function
CPU*1: 90(H)x31(W)x65(D)
CPU*2: 90(H)x49(W)x65(D)
CX-P
< Peripheral port connection >
for Connection with PC requires cables:
CS1W-CN*** or CS1W-CN118 +
XW2Z-***S-**
< RS232C port connection >
Connection with PC requires cables:
XW2Z-***S-CV or XW2Z-***S（-V）.
Available
C200H-PRO27
CQM1-PRO01
CJ2M-CPU**
2,560 points
CPU*1: 5k step
CPU*2: 10k step
CPU*3: 20k step
CPU*4: 30k step
CPU*5: 60k step
32k words
EM
CPU*1 to *3: 1 bank (32k)
CPU*4 to *5: 4 banks (32k x 4)
Built-in CPU funciton will be available by
mounting CJ2M-MD211/CJ2M-MD212. Up
to two units can be mounted.
In:10 points/Out:6 points (when one unit is
used)
In:20 points/Out:12 points (when two units
are used)
Attention: It is possible to use the unit with
the CPU Unit of unit version 2.0 or later.
1-30 steps/one instruction
0.04us
0.12us
CPU3*: 270us
CPU1*: 160us
40 units
3
Equipped as a standard function
CPU*1: 90(H)ｘ31(W)ｘ75(D)
CPU*3: 90(H)ｘ62(W)ｘ75(D)
CX-P
< Peripheral (USB) port >
A direct connection can be made between
the USB port of the personal computer
and the PLC
commercially-available USB cable
< Serial (RS232C) port connection >
Use the serial
(XW2Z-200S-CV/500S-CV) to connect the
PC and serial port on the CPU Unit. (The
CPU3* does not have the RS232C port on
it. Mount the RS232C option board
(CP1W-CIF01) and connect the cable with
the unit)
Not supported
using the
cable
3