Samsung OfficeServ 7200 Technical Manual page 35

ITP-5012L KEYSET
LCD Panel
Displays a large quantity
of information so that
the users can easily
search.
Volume Button
Used to adjust
Select Button (6)
the volume of
the handset,
speakerphone,
ringer, back-
ground music
and page.
Screen
Button
Dial Button
Speaker Button
For handsfree operation and ringing.
Hold Button
Used to save a call
without hanging-
up on the current
call.
8
Select Buttons (6)
To select a specific item
the user can simply
press the Select button
next to the item.
Status Indicator
Used to provide
your keyset status.
Scroll
Button
Navigation Button
Microphone Button
Conference Button
Used to make a calls of
up to 5 parties.
Transfer Button
Home Page
ASSEMBLING YOUR KEYSET
• Place the keyset face down on a flat surface.
• Insert notched ends of the support bracket into the channels located in the
upper section of the bottom panel. Push towards the top of the keyset to lock
in.
• Plug the handset cord into the jack marked with the
• Route the handset cord out the RIGHT side of the keyset as you look at it face
down.
• Plug the eight-conductor LAN cable, from the wall, into the jack marked LAN
on the back of the keyset.
• Plug the eight-conductor PC cable, from the PC, into the jack marked PC on
the back of the keyset.
• Plug the power connector, from the power adapter provided, into the power
jack on the back of the keyset.
• OPTIONAL: To connect a recording device, plug the device connector into the
jack marked REC on the bottom of the keyset.
IMPORTANT NOTE:
• Be careful not to connect the Network LAN cable into the PC connector of the
phone.
• To prevent damaging the keyset, only use the Power Adapter that came with
the 5012L keyset.
ITP-5012L
Table of Contents
symbol.
9