System Admin
Home Page
Table of Contents
SYSTEM MAINTENANCE
ALARMS
The iDCS 100 Release 2, iDCS 500 Release 2, and OfficeServ 7200 systems provide
a feature that self-checks for any failures. If a failure does occur in the software or
hardware, a fault error will be generated and buffered to an alarm report. During
an alarm state every phone with an assigned SYSTEM ALARM button will ring
and cause the SYSTEM ALARM button to flash amber. A phone with a display
should be used so that the alarm information can be viewed. When an alarm
occurs, the user can press the SYSTEM ALARM button to view and scroll through
the alarms.This will silence the audible part of the alarm, but the SYSTEM ALARM
button will continue to flash until your Service Company views and clears the
alarms in the alarm report located in the system software.
35
36