Table of Contents
Advertisement
1-2 Attachment of Ceiling Mount
Caution
Embedded Cover in Ceiling (recess bracket)
To a ceiling slab or channel
Ceiling Mount
• Attachment of a embedded cover in the ceiling
Ceiling
• Please refer to the instruction manual for the cover
• For more detail, please contact the JVC.
Safety wire
hole
Rubber seals
(Four on each side)
(recess bracket) may be mandatory in certain
regions. If this is so, ensure that the embedded
cover (recess bracket) is securely attached
before installing the camera.
in use for details on installation of the embedded
cover (recess bracket).
1.
Attach safety wire to prevent camera
from falling down
Connect the ceiling slab or channel to the
ceiling mount using the wire to prevent the
camera from falling down. Make use of the
safety wire mounting hole to connect the
ceiling mount and the wire.
(See diagram on the left)
Choose a wire and ceiling structure with an
appropriate strength and length that may
prevent danger in case the camera falls down.
Notes
• Connect the wire so that it can be insulated
from the ceiling structure.
If the ceiling structure is made of a metallic
material, improper insulation with the
camera may cause noise interference in
the images.
• Safety wires are not provided. Please
purchase commercially available wires on
a separate basis.
Cautions
19
Advertisement
Table of Contents
