Table of Contents
Advertisement
1
Zoom
This function sets maximum zoom ratio of the
electronic zooming.
(Set value: x1, x2, x4, x6, x8, x10)
2
Focus
For selecting the mode of focus.
Easy Auto Focus : Focus will be adjusted automatically
upon performing Pan/Tilt or Zoom
operations on the camera.
Manual
: Adjust focus manually.
3
Color Level
Adjusts the color level of video signals.
(Set value: -5 to 5)
4
Enhance Level
Sets the contour enhancement which controls
the sharpness on the monitor screen. (Set
value: -5 to 5)
5
V. sharpness
This function sets sharpness in the vertical
direction of the image.
(Set value: Normal, High)
6
Pedestal Level
Sets the pedestal level (black level) of video
signals.
(Set value: -5 to 5)
7
Auto Black Control
Use this function when darker parts of a picture
are unclear even after the gain has been
increased using the AGC (Auto Gain Control).
(Set value: ON, OFF)
8
AGC:
Sets the maximum gain of the AGC (Auto Gain
Control), which electronically increases the
gain when the object is under low light
conditions.
(Set value: OFF, 10 dB, 20 dB)
9
Sense Up
This function is used to increase the sensitivity
by extending the exposure time. Increasing this
value slows the shutter speed and motion may
appear unnatural.
(Set value: OFF, x2, x4, x8, x16, x24, x32)
0
ALC Priority
When an object is dark, this function sets
whether priority during monitoring is placed
on maintaining the motion of the camera or
on picture quality.
(Set value: Motion, Picture)
!
Shutter
Sets the speed of the shutter.
(Set value : 1/60, 1/100, 1/250, 1/500, 1/
1000, 1/2000, 1/4000, 1/10000)
@
Manual Focus Level
For adjusting focus when [Focus] in
to "Manual". Focus will be set on a nearer
object when the value decreases, and on a
distant object when the value increases.
(Set Value: 0 to 100)
Click the [One-push AF] button to enable
automatic focus.
#
Iris Mode
For performing setting related to lens iris
adjustment.
Auto
: Adjusts iris automatically to the
default state.
Manual : Adjust iris manually.
Auto+ : Adjusts iris automatically to a level
brighter than the default state.
Auto-
: Adjusts iris automatically to a level
darker than the default state.
$
White Balance
For setting the white balance, which provides
a color standard.
ATW
: Adjusts the white balance automatically
according to the color temperature of
the lighting.
AWC : Adjusts the white balance automatically.
R-B : Adjusts the phases of R (Red) and
B (Blue) under AWC mode.
Mg-G : Adjusts the phases of M (Magenta)
and G (Green) under AWC mode.
%
Average:Peak
Sets the method of exposure detection
according to ratio between the average and
peak values.
(Set value: 10:0, 9:1, 8:2, 7:3, 6:4, 5:5)
1
is set
95
Advertisement
Table of Contents
