Table of Contents
Advertisement
Preparation (Step 1 Connection/Installation)
1-2 Attachment of Ceiling Mount (Continued)
20
Screws
2.
Fasten the ceiling mount to the ceiling
While taking care not to catch the connection
cables, attach the Ceiling Mount to the ceiling
using four screws (as shown in the diagram).
Use 8-32 UNC-sized (M4-sized) screws or
bolts. If woodscrews are used, use those with
a diameter of 4.1 mm.
Notes
• Be sure to use 4 screws and attach them
firmly.
• The seals attached to the ceiling-mount
screw holes of the ceiling mount act as an
insulator between the ceiling mount and the
ceiling structure. If the ceiling structure is
made of a metallic material, improper
insulation with the camera may cause noise
interference in the images. To prevent this
from occurring, ensure proper insulation
during installation.
Advertisement
Table of Contents
