Attaching The Ceiling Mount; Attaching The Camera - JVC TK-C655 Instructions Manual

Connections & Installation

Attaching the Ceiling Mount

To a ceiling slab or channel
Ceiling Mount
Screws

Attaching the Camera

16
Safety wire hole
Rubber seals
(Four on each side)
Attach Drop
Prevention Wire
to this hook.
Drop Prevention
Wire
1.
Attaching a safety wire.
Attach a safety wire to the Ceiling Mount and to the ceil-
ing slab or channel to prevent the unit from being able to
fall to the floor. First attach the safety wire to the Ceiling
Mount by passing the wire through the safety wire hole
(see the diagram on the left).
MEMO
●
Connect the wire so that it can be insulated from the ceiling struc-
ture. If the ceiling structure is made of a metallic material, inade-
quate insulation with the camera may produce noise in the video
signal.
●
Use a wire and ceiling attachment having sufficient length and
strength to prevent danger in case the camera drops.
●
A safety wire is not provided. Please use an appropriate commer-
cially available wire.
2.
Attaching the Ceiling Mount to the ceiling.
While taking care not to catch the connection cables, at-
tach the Ceiling Mount to the ceiling using four screws
(as shown in the diagram). Use M4-sized screws or bolts.
If woodscrews are used, use those with a diametre of 4.1
mm.
MEMO
●
Be sure to use four screws and attach them firmly. If the screws
are not tightened firmly, dust and moisture may enter the unit via
the screw holes.
●
The rubber seals attached to the Ceiling Mount screw holes of the
Ceiling Mount play the role of insulation in case the ceiling struc-
ture is made of a metallic material as well as the role of drip proof-
ing. If the ceiling structure is made of a metallic material, improper
insulation with the camera may produce noise in the video. To
prevent this occurring, be sure to ensure correct insulation of the
installation.
1.
Attach the drop prevention wire.
As shown in the diagram, take the drop prevention wire
from the camera and attach it to the hook on the Ceiling
Mount.
Be sure to connect the drop prevention wire. Otherwise,
the camera will not fit properly to the Ceiling Mount. If
they are engaged forcibly, they may be damaged.
CAUTION
Be sure to attach the safety cable. Otherwise, the camera could
fall to the floor, caring damage to itself and any person passing
underneath.