Table of Contents
Advertisement
Item
1
FTP Function
Snap Shot FTP
Upload
Interval
Alarm FTP
Before trigger
After trigger
Upload
Interval
Filename
(Still image
FTP, Same as
Alarm FTP)
2
User name
3
Password
4
Host IP Address
5
FTP Port
6
FTP Folder
7
Connection
Disconnect everytime
8
Error Recovery
On connect error
Retry forever
Retry Interval
On transfer error
Stop
Uploading
For setting whether to use the FTP function.
Check this box when the function for uploading JPEG images to the
FTP server is to be used regularly.
Specify the time interval at which images are uploaded to the FTP
server. (Set value: 0 to 65535 seconds)
Check this box to upload JPEG images to the FTP server when
there is an alarm input.
Set the time interval for uploading images before an alarm input.
(0 to 15 seconds before trigger)
Set the time interval for uploading images after an alarm input.
(0 to 60 seconds after trigger)
Specify the time interval for uploading images to the FTP server
when in the Alarm FTP mode. (0 to 60 seconds)
Specify the name of the image file to upload.
*.jpg
File will be uploaded using the file name specified here.
*Only 1 image file remains in the FTP server as images are
uploaded as the same file name. (The old image will be
overwritten by the latest image.)
Time
Images are uploaded using a file name that indicates the current
stamp
time of the internal clock in VN-C655 in the (YYYY-MM-DD-HH-MM-
SS-mmm) format.
* Images are always uploaded with a different file name and
therefore all uploaded image files will remain in the FTP server.
Enter the user name to use for verification with the FTP server. (1 to
16 characters)
Enter the password to use for verification with the FTP server.
(0 to 32 single-byte characters) (Displayed as "***")
Enter the IP address of the FTP server at the upload destination.
Enter the FTP port number at the upload destination.
Enter the folder name on the FTP server at the upload destination.
Set whether to disconnect everytime upon uploading.
Disconnect upon uploading each image.
Connection will have to be re-established when uploading the next image.
Specify a recovery action when errors related to FTP occur.
Specify a recovery action when errors related to TCP connection or
FTP verification occur.
Recovery attempt is repeated until the power for VN-C655 is turned off.
Repeats recovery attempt within the specified time interval.
(Set value: 1 to 600 mins)
Specify a recovery action upon occurrence of a file transfer error
while uploading the images.
Disable the FTP function of VN-C655 automatically upon occurrence
of a transfer error. To resume, enable the FTP function.
Meaning
103
Advertisement
Table of Contents
