Table of Contents
Advertisement
3-6 Frame Rate
The "V.Networks Controller" can be used to set a maximum value for the frame rate,
which indicates the number of live image updates per second.
1.
Select [Setting] and [Frame rate].
2.
Set the [Frame Rate].
Notes
The actual number of frames received and displayed per second is dependent on factors such
as PC performance, compression level of images and the LAN environment.
In the case of a LAN environment where multiple operations are being performed at one time
(particularly when the network traffic is heavy), reduce the number of frames to be transmitted.
Cautions
Frame rate for local recording cannot be set using this function. To set the frame rate for local
recording, make use of the "VN-C655U Setup Tool" (
Set the maximum number of images per
second that are sent from VN-C655.
(Factory Setting: 15)
Set value : 30, 15, 10, 8, 6, 5, 4, 3, 2, 1,1/
2,1/3, 1/5, 1/10, 1/15, 1/20, 1/30
☞
Page 40).
65
Advertisement
Table of Contents
