Table of Contents
Advertisement
2-4 Other Settings Using the "VN-C655U Setup Tool" (1. Password Setting)
PCs (users) connected to this camera are regulated via an access protection function
which requires a password entry.
Passwords can be set or canceled using the "VN-C655U Setup Tool".
A different password can be set for each of the 3 authorization levels, namely user, operator and administrator.
Authorization Level
User
Operator
Administrator
Note
Do not forget the passwords as canceling or changing of passwords is not possible unless the
current and correct password is entered.
1.
Start up the "VN-C655U Setup Tool", followed by selecting [User], [Operator] or
[Administrator] under [Password] setting.
2.
The following confirmation screen will be displayed.
Notes
• For a password-protected VN-C655, a password request screen will be displayed.
• VN-C655 setup will not be possible unless the correct administrator password is entered.
• Security level increases in the order from user to operator to administrator. Password protection
will not be valid if a password is assigned only to a lower level but not to a higher one.
Viewing of motion images only
All operations using the V.Networks Controller
All of the above and all settings using the VN-C655U Setup Tool
Allowed Access
1
Enter a password to set password
protection or to change a password.
Characters entered are displayed as
• Enter the same password in both the
upper and lower boxes.
• Password must be alphanumeric and not
longer than 8 characters.
Note
To cancel the password setting, leave
the entry box blank and click OK.
2
Click
.
Click
.
.
*
31
Advertisement
Table of Contents
