Disassemble And Remove The Nibp Assembly - Welch Allyn 53 Service Manual

Disassemble and Remove the NIBP Assembly

...and the flanged side down.
Disassemble and Remove the NIBP Assembly
Repair or replacement of the NIBP assembly is not supported. All NIBP
service must be performed at an authorized Welch Allyn service center.
1. Remove the tubing and the pump.
Service Manual
J3 cable connector properly
aligned with the J3
connector on the main
board. The cable connector
is slotted on the top side.
J3 cable connector properly
aligned with the J3
connector on the main
board. The cable connector
has latching tabs on the
bottom side.
58
Disassembly Procedure
Vital Signs Monitor Series 300