Input Select - Eiki LC-XAU200 Owner's Manual

Input select

Direct Operation
Press HDMI, VGA, COMOPNENT, S-VIDEO
or VIDEO button to select HDMI, VGA IN,
Component, S-video or Video as input source.
Control panel
INPUT
Menu operation
1 Press MENU button on the remote control or
top control to display the input select menu.
2 Press  button to select HDMI,VGA IN,
Component, S-video or Video , then press
OK button.
When input source is from
HDMI
equipment connected to HDMI
terminal with HDMI cable,
please select HDMI.
When input source is from
VGA IN 1
computer connected to VGA
IN 1 terminal with VGA cable,
please select VGA IN 1.
When input source is from
VGA IN 2
computer connected to VGA IN
2/VGA OUT terminal with VGA
cable, please select VGA IN 2.
Select it when the input source
Component
is from the video equipment
connected to COMPONENT
terminal with a RCA cable.
Select it when the video input
S-video
signal is connected to S-VIDEO
terminal.
Select it when the video input
Video
signal is connected to VIDEO
IN terminal.
Note:
- When the Input Search function is set to On in the Auto setup function, the input signal will be
searched automatically.
- When VGA IN 2/VGA OUT terminal is used as VGA OUT, VGA IN 2 can not be selected.
28
Remote control
INPUT
HDMI
COMPONENT VIDEO
Input select menu
HDMI
VGA IN 1

VGA IN 2
Component
S-video
Video
VGA
S-VIDEO