Table of Contents
Advertisement
Expand
(3) When DHCP is set On, IP address,
Subnet, Gateway and DNS will be
obtained automatically, press OK at "Set"
to confirm the parameters.
When DHCP is set Off, press button
to enter IP address, then press button
to enter Subnet, Gateway and DNS
respectively, press OK at "Set" to confirm
the parameters.
Factory default
This function returns all setting values except
for the User logo, PIN code lock, Logo PIN
code lock, Lamp counter and Filter counter to
the factory default settings.
Lamp counter reset
This function is used to display the cumulative
lamp operating time and reset the lamp
counter.
When the total lighting time of a lamp exceeds
the recommended total hours of use, the Lamp
replacement icon (page 57) will appear on the
screen, indicating that the end of lamp life is
reached.
When replacing the projection lamp, reset lamp
counter. See "Lamp Counter Reset" on page
58.
Lamp counter..........The time that lamp used.
Lamp counter reset..Reset the Lamp counter.
48
DHCP
IP address
Subnet
Gateway
DNS
Adjust
DHCP
IP address
Subnet
Gateway
DNS
Move
Factory default
Language
PC adjust
Auto setup
Logo
Display
Security
Power management
Color adjust
Filter counter
Setting
Test pattern
Network
Expand
Factory default
Lamp counter reset
Info.
Move
Return to Factory default?
Yes
Move
Return to Factory default?
Yes
Move
Network setting
On
Set
Cancel
Select
Back
Network setting
Off
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Set
Cancel
Select
Back
Next
Exit
No
Select
Back
Yes
OK?
No
Select
Back
Advertisement
Table of Contents
