Turn Off The Projector - Eiki LC-XAU200 Owner's Manual

Turn off the projector

1. Press the POWER button on control panel
or on the remote control, and "Power off?"
appears on the screen.
2. Then, press the POWER button again in 4
seconds. The POWER indicator starts to
flash red, and the cooling fans keep running
(You can select the level of fans' quietness
and running speed. Page 40). Now you can
unplug the AC power cord even if the fans
are still running.
3 When the projector has cooled down enough
to be turned on again, the POWER indicator
stops flashing.
To maintain the lamp life, once you turn the
projector on, wait at least 5 minutes before
turning it off.
Do not operate the projector continuously
without rest.
Continuous use may result in shortening the
lamp life.Turn off the projector and let it stand
for about an hour in every 24 hours.
Note:
● When the On start function is "On" , this projector is
turned on automatically by connecting the AC power
cord to an AC outlet .
● The running speed of cooling fans is changed
according to the temperature inside the projector.
● Do not put the projector in a case before it is cooled
enough.
● If the POWER indicator flashes or emits a red light,
see "Power Indicator" on Page 54 and "Indicator and
State" on Page 62.
● While the POWER indicator is flashing, the lamp
is being cooled down and the projector cannot be
turned on. Wait until the POWER indicator turns red
to turn on the projector again.
● The fan rotation will terminate directly if the AC power
cord is unplugged immediately after the projector is
turned off.
● The projector can be turned on after the POWER
indicator turns red. The waiting time to restart will be
shortened when the normal power-off processing for
fan cooling is completed, comparing with the time
the AC power cord is immediately unplugged after
the power-off.
Power off ?
"Power off ? " disappears after 4 seconds.
Basic operation
21