Table of Contents
Advertisement
PC Adjust
Manual PC adj.
Some computers employ special signal formats which may not be tuned by Multi-scan system of this
projector. Manual PC Adjustment is provided for you to precisely adjust several parameters to match
those signal formats. The projector has five independent memory areas to store those parameters
manually adjusted, which allows you to recall the setting for a specific computer.
1 Press MENU button on the remote control
to display screen menu. Press button
to select PC adjust,then press OK button.
2 Press button to select the item you
want to adjust ,then button to adjust
the data.
Fine sync
Press
buttons to adjust the value, eliminating
a flicker from the image displayed (from 0 to 31).
Total dots
Press
buttons to adjust the number of total
dots in one horizontal period to match your PC
image.
Horizontal
Press
to adjust the horizontal picture
position.
Vertical
Press
to adjust the vertical picture position.
Display area H
Press
to adjust the horizontal area displayed
by the projector.
Display area V
Press
to adjust the vertical area displayed by
the projector.
Reset
To reset the adjusted data, select Reset and press
OK . A confirmation box appears and then select
Yes. All adjustments will return to their previous
figures.
Mode free
To clear the adjusted data, select Mode free and
then press
or OK .Move
the Mode you want to clear and then press OK.
Store
To store the adjusted data, select Store and then
press
or OK. Move the red arrow indicator to
one of the Mode 1 to 5 in which you want to store,
and then press OK.
30
or OK to highlight
Manual PC adj. menu
Auto PC adj.
PC adjust
Fine sync
Total dots
Display
Horizontal
Vertical
Color adjust
Display area H
Setting
Display area V
Reset
Expand
Mode free
Store
Info.
Move
√ Note:
If you select 480i, 576i, 480p, 576p, 720p or
1080i from the system menu, the functions of
both horizontal image and vertical image will be
disabled.
16
1056
216
27
800
600
Next
Exit
Advertisement
Table of Contents
