Display
System
Computer system select
The projector automatically tunes to various types of computers with its function of Multi-scan system
and Auto PC Adjustment. If a computer is selected as a signal source, the projector automatically
detects the signal format and tunes to project proper images without any additional setting.
One of the following messages may appear when:
When the projector cannot recognize
Auto
the connected signal conforming to
the provided computer system, Auto
is displayed on the System menu box
and the Auto PC Adj. function works
to display proper images. If the image
is not projected properly, a manual
adjustment is required.
There is no signal input from
-----
computer. Check the connection
between your computer and projector.
Select computer system manually
The system can also be selected manually.
1 Press MENU button on the remote control to
display the screen menu.Press button to
select the Display icon, and press OK button.
2 Press button to select System and press
OK button.
3 Press button to select your required
system, and then press the OK button.
Note:
When HDMI is selected, System menu for computer is disable.
34
Screen Size
PC adjust
Keystone
Project Mode
Display
Menu Position
Background Display
Color adjust
System
Setting
Expand
Info.
Move
System
System for computer signal
PC adjust
1024x768@60
1366x768@60
Display
----
----
Color adjust
----
Setting
Expand
Info.
Adjust
Normal
Stored
Front
Center
Blue
1024x768@60
Next
Exit
System
RGB(PC1)
Select
Back