Table of Contents
Advertisement
The projector has Expand menu that allows you to set the other various expand functions
described as follows.
1 Press MENU button on the remote control to
display screen menu. Press button to
select Expand, then press OK button.
2 Press button to select the item you
want to set, press OK button.
3 Press button to adjust the item, then
press OK button.
Language
Press button to select the language for
screen manual.
This projector provides languages below:
English, French, Spanish, Portuguese,
German, Italian, Japanese, Korean, Russian,
Finnish, Dutch, Thai, Vietnamese, Turkish,
Afrikaans, Indonesian, Persian, Arabic,
Traditional Chinese,Simplified Chinese.
Auto setup
Press AUTO button on the remote control
to execute Input search and Auto PC adj.
functions.
Input search
Allows you to automatically detect input signals.
It stops when a signal is found. Press button
to select an option below:
Off........Disabled.
On........ Enabled. This function is used to
detect input signals automatically
and stops when finding a signal.
Auto PC adj.
On........ Press the AUTO button on the
remote control to enable Auto PC
adj. function automatically.
Off........Cancel Auto PC adj. function.
Auto keystone
Off.........Disable auto keystone function.
Manual.. Press the AUTO button on the top
control or remote control to enable
Auto keystone function.
Auto...... Correct keystone distortion according
to the slope of the projector.
Expand menu
Language
PC adjust
Auto setup
Logo
Display
Security
Power management
Color adjust
Filter counter
Setting
Test pattern
Network
Expand
Factory default
Lamp counter reset
Info.
Move
Auto setup
PC adjust
Input search
Auto PC adj.
Display
Auto keystone
Color adjust
Setting
Expand
Info.
Move
Note:
- Only the last selected input source can be
detected.
- If the INPUT button on the top control or on the
remote control is pressed during Input search is in
progress, Input search will stop and go back to the
previous input signal.
- Fine sync., Total dots, Horizontal and Vertical
position of some computers cannot be fully
adjusted with the Auto PC Adj. function.
When the image is not provided properly with this
operation, manual adjustments are required.
Expand
Next
Exit
Auto setup
On
On
Auto
Next
Back
43
Advertisement
Table of Contents
