Basic operation
How to operate the screen menu
The projector can be adjusted or set via the
on-screen menu. Each main menu can be
divided into several levels of submenus, and
submenus are also divided into several levels
of sub-submenus.
For each adjustment and setting procedure,
refer to the respective sections in this manual.
1 Press the MENU button on the top control or
the remote control to display the screen
menu.
2 Press buttons to select an entry in the
main menu and then press OK button to
enter the submenu.
3 Press buttons to select your required
item, and then press OK button to set or
enter required item.
4 Press buttons to adjust settings or
switch among the items. Press the OK button
for corresponding operation and then press
MENU button return to the submenu.
5 Press MENU button to return to the previous
menu. Press MENU button again to exit the
screen menu.
22
Control panel
MENU
Remote control
Screen menu
Auto PC adj.
PC adjust
Fine sync
Total dots
Display
Horizontal
Vertical
Color adjust
Display area H
Setting
Display area V
Reset
Expand
Mode free
Store
Info.
Move
OK/INPUT
MEMU
OK
16
1056
216
27
800
600
Next
Exit