Power Management; Filter Counter - Eiki LC-XAU200 Owner's Manual

Expand

Power management

For reducing power consumption as well as maintaining the lamp life, the Power management
function turns off the projection lamp when the projector is not operated for a certain period. Select
one of the following options:
Ready .................. When the lamp has been fully cooled down, the POWER indicator changes
Shut down ........ ....When the lamp has been fully cooled down, the power will be turned off.
Off ......................... Power management function is off.
Timer .................... If the input signal is interrupted and no button is pressed for more than 30
Ready countdown..Set the time that ready status transfers to standby status automatically.(0-
Power management
No signal
01 : 20
Time left before Lamp is off.
Note:
Factory default: "Ready: 5 min".

Filter counter

This function is used to set a frequency for filter
cleaning.
When the projector reached a specified time
between cleanings, a Filter warning icon
appears on the screen, notifying the cleaning
is necessary. After cleaning the filter, be sure
to select Filter counter reset and set the timer.
The Filter warning icon will not turn off until the
filter counter is reset.
Filter counter..........The time that filter used.
Timer.......................Frequency for filter
Filter counter reset.. Reset the filter counter
46
to green blinking.In this condition, the projection lamp will be turned on if the
input signal is reconnected or any button on the top control or remote control
is pressed.
seconds, the timer display with No signal appears. It starts the countdown
until the lamp is turned off. Press  button to set the Timer(1~30min.)
30min.0 Min: not transfer automatically)
In ready status, press POWER button to switch to standby status, and press
any other button to turn on the projector.
cleaning.
(Page 55)
Power management
PC adjust
Ready

Shut down
Display
Off
Timer
Color adjust
Ready countdown
Setting
Expand
Info.
Adjust
Filter counter
PC adjust
Filter counter
Timer
Display
Filter counter reset
Color adjust
Setting
Expand
Info.
Move
Power management
5 Min
0 Min
Select Back
Filter counter
0 H
400 H
Next Back