TM-2000 to ICP-2000 RS-485 COM ports.
FIGURE 27.
PC (TrunkEdit/TrunkSupervisor) to TM-
FIGURE 28.
2000 or SWP-2000 RS-232 data cable.
SWP-2000
FIGURE 29.
Recommended Cables
For cables using RJ-11 connections use Category 5
1.
(CAT-5) network cable.
For RJ-45 connectors, use CAT-5 network cable. RJ-
2.
45 Crossover (TM-2000 to TM-2000 network)
cables can be purchased pre-made from a computer
dealer.
For audio cables, use Belden 8723 or similar type
3.
with two twisted pairs with shield/drain wires.
For individual RS-232 or RS-485 data cables, use
4.
Belden 8451 or similar type with single twisted pair
with shield/drain wire. DO NOT EXCEED 50 FEET
RUN WITH RS-232 CABLES! RS-232 cables can
be purchased pre-made from a computer dealer. Use
an RS-232 wired "Straight Through" for SWP-2000
to TM-2000 connections. Use a RS-232 wired "Null
Modem" for PC to TM-2000/SWP-2000 connection.
For TM-2000 to ICP-2000. RS-485 cables use the
5.
supplied cables.
For TM-2000 to SWP-2000 status/control cables use
6.
25 conductor shielded cable. DO NOT EXCEED 10
FEET RUN LENGTH WITH CABLE.
23