Updating The Tm-2000/Mtm-2000 Software - RTS TM-2000 User Manual

Updating the TM-2000/MTM-2000 Software

In order to update the TM-2000/MTM-2000, the following files are required:
update_tm.sh
one or more update files, typically with a name such as to_v830.tgz
These must be copied to a DOS-formatted floppy disk.
To perform an update, do the following:
Log onto the console as the user root. (A password may have been set for this user when the software was initially
1.
installed.)
A line or two of information displays followed by a prompt, similar to root@tm1~#.
Shut down the TM-2000/MTM-2000 by running /m/stop_tm all.
2.
Several lines of output will appear followed by another prompt.
Put the floppy disk containing update_tm.sh and the first update file in the disk drive.
3.
Enter the command sh /tm/new_ver.sh
4.
This will copy the files to the hard drive. If multiple floppy disks are required, the PC will prompt you to change the
disks.
When the update is complete, remove the disk, and reboot the computer.
5.
17