Table of Contents
Advertisement
26 Installation
PC (TrunkEdit/TrunkSupervisor) to
FIGURE 25.
TM-2000 or SWP-2000 RS-232 data cable.
SWP-2000
FIGURE 26.
Bosch Security Systems, Inc.
Recommended Cables
For cables using RJ-11 connections, use CAT-5
•
network cable.
For RJ-45 connectors, use CAT-5 network cable.
•
RJ-45 Crossover (TM-2000 to TM-2000 network)
cables can be purchased pre-made from a computer
dealer.
For audio cables, use Belden 8723 or similar type
•
with two (2) twisted pairs with shield/drain wires.
For individual RS-232 or RS-485 data cables, use
•
Belden 8451 or similar type with single twisted pair
with shield/drain wire. DO NOT EXCEED 50
FEET RUN WITH RS-232 CABLES! RS-232
cables can be purchased pre-made from a computer
dealer. Use an RS-232 wired straight through for
SWP-2000 to TM-2000 connections.
Use a RS-232 wired "Null Modem" for PC to TM-
2000/SWP-2000 connection.
For TM-2000 to ICP-2000, RS-485 cables use the
•
supplied cables.
For TM-2000 to SWP-2000 status/control cables
•
use 25 conductor shielded cable. Do not exceed 10
feet run length with cable.
User Manual
TM-2000 & MTM-2000 User Manual
F.01U.193.264
Rev. 12
Advertisement
Table of Contents
