Manual Port Forwarding - Beward N300 Installation & User Manual

Step 4: in the [RTSP port] field enter the RTSP port number that you want to use to access
the camera over the Internet.
Step 5: click [Save] to save the changes.
IMPORTANT:
It is necessary to reboot the camera for the changes to take effect.
IMPORTANT:
When using port forwarding, the port number values of the camera and the router must match.
To access the camera over the Internet, use the IP address provided by your ISP (IP
address of the router's WAN port) and a certain port number.
For instance, the WAN IP address is 77.108.73.169 and the HTTP port number is 10000. In
this case, you need to enter the following in the address field of your browser:
http://77.108.73.169:10000/.
To use several cameras, you need to specify a unique port number for each one and
configure the port forwarding.

6.3.2. Manual Port Forwarding

If your router does not support UPnP, you must configure your router manually to forward
the ports. To describe this way of connecting the IP camera, use the TP-Link TL-WR2543ND
router.
IMPORTANT!
This type of connection requires a static public IP address. Usually
a dynamic internal IP address, which can be used only inside the LAN. Contact your ISP to determine your
IP address type.
Let us suppose that Internet and LAN connections are configured on your router. The
router's static public IP address provided by your ISP is 77.108.73.169.
The IP address range used on the local network is 192.168.1.1 – 192.168.1.255. The
router's IP address is 192.168.1.1 and the camera's IP address is 192.168.1.199. For setting, we
use a computer connected to this local network.
To access the camera over the Internet, you need to configure its ports. On the local
network the port numbers used for accessing camera's settings and video on default are the
following: HTTP port – 80, RTSP port – 554.
N300 Installation User Manual
Chapter 6. Accessing the Camera over Internet
Internet service provider (ISP)
offers
43