Remote Control; Front Panel Controls - Lyngdorf Audio TDAI-2170 Owner's Manual

Remote control

- the most used buttons
1. Standby Turns the TDAI-2170 on and into standby.
2. Digital and Analog Selects, or if already active, cycles to the next input.
3. Channel -/+ Toggles between active inputs.
4. Up/Down Toggles between the available RoomPerfect™ fi lters. Increases
and decreases settings in the menu.
5. Left/Right Toggles between neutral and the available voicings.
Used to browse in the menu.
6. Info Shows information of level and type of input signal.
7. Menu Press to enter the menu. When in the menu press to go back or cancel.
Note: If the TDAI-2170 isn't responding to the remote, press the AMP key and
try again. If that doesn´t work, check the batteries.
8
1
1 2 3
4 5 6
7 8 9
6
0
digital info
2
7
analog menu
RCS CD
AMP TUNER
3
channel volume
4
ENTER
5
A/B
1. Source/menu Press to mute and unmute.
random repeat
Press and hold to access the menu, press to select a menu item, press and hold to exit a menu.
Rotate left and right to toggle between audio sources and browse while in the menu.
2. Volume wheel Adjust the volume with left or right rotation.
3. Standby button Turns the TDAI-2170 on and into standby.

Front panel controls

1 2 3
9