Recall Custom Set - IBM 6500 User Manual

Recall Custom Set

The printer can store 8 custom sets in NVRAM. This parameter allows you to
select and load a specific custom set.
v Factory Default (the default). The factory-preset custom set; its parameters
cannot be changed. It is always available for loading.
Custom/Preloaded Sets 5-8 contain configuration sets that assist with the
installation and configuration of this printer. These sets are preloaded at the
factory. If these sets are not used, you can delete them and create new custom sets.
Following is a brief description of Custom/Preloaded Sets 5-8:
v Custom/Preloaded Set 5 is used when configuring this printer to function like a
Printronix printer. This custom set contains ASCII emulations used by Printronix
compatible printers along with initial defaults (Overstrike, Auto LF, and so
forth). The initial ASCII default emulation is P-Series which may need to be
altered for P-Series XQ or Serial Matrix in some applications. This operation is
defined only in CT or CT/IPDS builds. For more information, refer to the
Configuration Utility Diskette shipped with this printer, or the 6500–v ASCII
Programmer's Reference Manual.
v Custom/Preloaded Set 6 contains the default settings for an ASCII printer using
a set of Epson and Proprinter default values. This could be useful when the
printer has the Coax/Twinax feature, but is sometimes run as an ASCII printer.
This option is defined only in IGP, CD, and CT/IPDS builds. Refer to the 6500
Coax/Twinax Programmer's Reference Manual for more information.
v Custom/Preloaded Set 7 contains default settings for a Twinax printer without
IPDS. This could be useful when the printer contains the IPDS feature, but must
occasionally be used as a non-IPDS printer. This option is defined only in
CT/IPDS builds. Refer to the 6500 IPDS Programmer's Reference Manual or the
6500 Coax/Twinax Programmer's Reference Manual for more information.
v Custom/Preloaded Set 8 sets up the printer for an external CT Interpreter box.
This option is defined only for Non-CT IGP and ASCII builds.
Chapter 4. The Configuration Menus
65