IBM 6500 User Manual page 68

Changes made in the Quick Setup menu will have global impact. For example,
host interface settings made will carry forward and reflect in the Host Interface
menu as well. Similarly, changes made to any other parameter will be universally
applied (changing the default values) in all emulations or locations where these
settings are applicable.
An Active Emulation menu has been added. Depending on the emulations
installed or selected, a series of additional menus will appear dynamically,
depending on which emulation was chosen. The choice of emulations offered
depends on what emulations are included in the printer's software and have been
enabled by the Security Key.
As the active emulation is selected from either the Quick Setup Menu or from the
original Active Emulation menu location, the corresponding bottom menus for the
remaining emulations will be hidden. Only the menu tree for the selected active
emulation will be displayed.
If IPDS is installed, it will become the default emulation. There is no IPDS specific
menu items placed in the Quick Setup menu selections. However, the user can
define the ASCII settings as defined. If IPDS is not installed, then ASCII Printer
will be made the default selection. If ANSI is installed, then the menu will provide
the user with the choice between ANSI or ASCII Printer. If either TN3270 or
TN5250 are installed, this emulation becomes the default, with all default values
accepted.
54
Infoprint 6500 User's Manual