6500-Lu3-Dse-Local Sna 3174 Control Unit - IBM 6500 User Manual

6500-LU3-DSE-Local SNA 3174 Control Unit

LU3-DSE mode is utilized when no host printing controls are required to
accomplish the print function desired. The printer settings will be used and cannot
be overridden by the host system. An existing local 3174 SNA-connected control
unit is assumed. The steps required to install an LU1-DSE printer for host
definitions are as follows:
1. Define to VTAM by adding logmode entry to VTAM Logmode Table
2. Define to JES2 (Not required but recommended. See details below)
3. Define to CICS or another Application Program such as VPS or JES328X
products.
4. Select the options on the printer that are appropriate for the environment.
Step 1 - VTAM Definition
The following should be added to the Local Major Node VTAM definition. The
printer will be attached as an LU1-IPDS capable printer.
LOC3174 VBUILD
LOCPU74 PU
LOC6500 LU
LOCADDR=n,MODETAB=MYMODETB,DLOGMODE=printer,ISTATUS=ACTIVE
The following entry should be placed in the VTAM MODE TABLE specified above
or another of your choice.
6500DSEL MODEENT LOGMODE=6500DSEL,
FMPROF=X'03',TSPROF=X'03',PRIPROT=X'B1',
SECPROT=X'20',COMPROT=X'3080',RUSIZES=X'C7C7',
PSERVIC=X'038000000000185018507F00'
PSNDPAC=X'00',SRCVPAC=X'00',SSNDPAC=X'00'
Step 2 - JES2 Definition (SYS1.PARMLIB)
RMT1 LUTYPE3,BUFSIZE=3840,LINE=1,NUMRD=0,NUMPR=1,NOCOMP,NOCMPCT,
SETUPHDR,CONSOLE
R1.PR1 CLASS=A,NOSEP,PRWIDTH=132,NOFCBLOD,WS=(W,R,Q,PMD,LIM,F,T/C,P),
CKTPAGE=30
DESTID NAME=LOC6500,DEST=R1
TYPE=LOCAL
CUADDR=nnn...
Appendix D. Attaching Host Systems to a Coax/Twinax Printer
279