Recall Custom Set - IBM 6400 Setup Manual

Recall Custom Set

The printer can store 8 custom sets in NVRAM. This parameter allows you
to select and load a specific custom set.
Factory Default is the factory-preset custom set; its parameters cannot be
changed. It is always available for loading.
Custom/Preloaded Sets 5–8 contain configuration sets that assist with the
installation and configuration of this printer. These sets are preloaded at the
factory. If these sets are not used, you can delete them and create new custom
sets. For example, Custom/Preloaded Set 8 is preconfigured for the
Coax/Twinax Multi–Platform Feature; but if you do not intend to use this
feature, you can delete Custom/Preloaded Set 8 or overwrite it with a new set
of configuration values. Following is a brief description of Custom/Preloaded
Sets 5–8:
Custom/Preloaded Set 5 is used when configuring this printer to function
like a Printronix printer. This custom set contains ASCII emulations used
by Printronix compatible printers along with initial defaults (Overstrike,
Auto LF, etc.). The initial ASCII default emulation is P–Series which
may need to be altered for P–Series XQ or Serial Matrix in some
applications. For more information, refer to the Configuration Utility
Diskette shipped with this printer, or the 6400 ASCII Programmer's
Reference Manual.
Custom/Preloaded Set 6 contains the default settings for an ASCII
printer using a set of Epson and Proprinter default values. This could be
useful when the printer has the Coax/Twinax feature, but is sometimes
run as an ASCII printer. Refer to the 6400 Coax/Twinax Programmer's
Reference Manual for more information.
Custom/Preloaded Set 7 contains default settings for a Twinax printer
without IPDS. This could be useful when the printer contains the IPDS
feature, but must occasionally be used as a non–IPDS printer. Refer to
the 6400 IPDS Programmer's Reference Manual or the 6400
Coax/Twinax Programmer's Reference Manual for more information.
Custom/Preloaded Set 8 contains a custom set for use with the optional
Coax/Twinax Multi–Platform Interface feature. Refer to the Coax/Twinax
Multi–Platform Feature Installation and Operation Guide for more
information on this custom set.
4–18 6400 Line Matrix Printers Setup Guide, Cabinet and Pedestal Models