Transmission Gear Indicator Light (For Viper 90R); Handlebar Switches - E-TON Viper 90R Owner's Manual

Transmission gear indicator light
(for VIPER 90R)
4
1. Forward indicator light "F"
2. Neutral indicator light "N"
3. Reverse indicator light "R"
Neutral indicator light "F"
This indicator light comes on when the transmis-
sion is in the forward position.
Neutral indicator light "N"
This indicator light comes on when the transmis-
sion is in the neutral position.
Neutral indicator light "R"
This indicator light comes on when the transmis-
sion is in the reverse position.
2 1
3
R N F

Handlebar switches

2
1. Engine stop switch "ENG. STOP"
2. Start switch "START"
Engine stop switch "ENG. STOP"
Set this switch to "
The engine stop switch controls the ignition and
stops the engine when it is running. Use this switch
to stop the engine in an emergency situation. The
engine will not start or run when this switch is set
to " ".
Start switch "START"
Push this switch to crank the engine with the start-
er. See the starting instructions on page 6-1 prior
to starting the engine.
4-2
1
" before starting the engine.