Engine Stop Switch With Lanyard (For Viper 70) - E-TON Viper 90R Owner's Manual

Engine stop switch with lanyard
(for VIPER 70)
The rubber cap must be attached to the engine
stop switch for the engine to run.
1
2
1. Engine stop switch
2. Rubber cap
3. Lanyard
The lanyard should be held by putting your fingers
in the loop as shown.
3
1. Lanyard
Should the ATV be separated from the parent by a
distance longer than the lanyard length after str-
etching, the lanyard will pull out the rubber cap
and stop the engine.
4-3
1
4