Operation; Starting A Cold Engine - E-TON Viper 90R Owner's Manual

Read the Owner's Manual carefully before riding
the ATV. If there is a control or function you do not
understand, ask your E-TON dealer.
WARNING
Read the Owner's Manual carefully to become
familiar with all controls in order to help prevent
any loss of control, which could cause an
6
accident or injury.

Starting a cold engine

WARNING
Inspect cables frequently and replace if dam-
aged. Corrosion can result when the cable
sheaths become damaged, and cables can
also become frayed or kinked, which could
restrict the operation of controls and lead to
an accident or injury.

OPERATION

NOTICE
See the "Engine break-in" section on page 6-4
prior to operating the engine for the first time.
1. Set the parking brake.
2. Turn the fuel cock to "ON".
3. Turn the main switch to "ON" and the engine
stop switch to "
4. Shift the transmission into neutral. The neutral
indicator light should come on. If the indicator
light does not come on, have an E-TON dealer
check the electrical circuit.(for VIPER 90R)
TIP
This model is equipped with an ignition circuit cut-
off system. The engine can be started under the
following conditions.
The transmission is in neutral.
The clutch is disengaged with the transmission
in gear. However, it is recommended to shift into
neutral before starting the engine.
------------(for VIPER 90R)-----------
6-1
".