Front Suspension; Removing The Front Wheel; Front Wheel Hub Overhaul - Gilera Runner RST 50 SP Service Station Manual

Runner RST 50 SP

Front suspension

This section is devoted to operations that can be carried out on the suspension.
Front

Removing the front wheel

- Remove the fixing nut from the wheel axle on the
left side of the vehicle.
- Loosen the fixing screw of the wheel axle clamp
and remove it.

Front wheel hub overhaul

- Remove the front wheel
- Keep the wheel level by means of two wooden
wedges
- With the appropriate pliers and tool remove the
wheel bearing on the side the rpm indicator detects
movement, as shown in the photograph
Specific tooling
001467Y014 Pliers to extract ø 15-mm bearings
001467Y009 Driver for OD 42-mm bearings
Suspensions
SUSP - 99