Top-Up - Gilera Runner RST 50 SP Service Station Manual

Table of Contents

Runner RST 50 SP

Top-up

Proceed as follows:

1. rest the vehicle on its centre stand with the han-

dlebars perfectly horizontal;

2. remove the rear-view mirrors;

3. remove the front handlebar cover;

4. remove the tank cover «A» loosening the two

fixing screws «B» and restore the level using only

the prescribed fluid without exceeding the maxi-

mum level.

Under normal climatic conditions, the liquid should

be replaced every two years. This operation must

be carried out by trained technicians, please con-

tact an Authorised Piaggio-Gilera Service Cen-

tre

CAUTION

TOP UPS SHOULD ONLY BE CARRIED OUT WITH DOT 4

CLASSIFIED BRAKE FLUID.

CAUTION

THE BRAKING CIRCUIT FLUID IS HIGHLY CORROSIVE.

THEREFORE, WHEN TOPPING IT UP, AVOID LETTING IT

COME INTO CONTACT WITH THE PAINTED PARTS OF

THE VEHICLE. THE BRAKING CIRCUIT FLUID IS HYGRO-

SCOPIC, THAT IS, IT ABSORBS HUMIDITY FROM THE

SURROUNDING AIR. IF MOISTURE CONTAINED IN THE

BRAKE FLUID EXCEEDS A CERTAIN VALUE, THIS WILL

RESULT IN INEFFICIENT BRAKING.

WARNING

IN NORMAL CLIMATIC CONDITIONS IT IS ADVISABLE TO

REPLACE THE ABOVE-MENTIONED FLUID EVERY 2

YEAR. NEVER USE BRAKE FLUID CONTAINED IN CON-

TAINERS WHICH ARE ALREADY OPEN OR PARTIALLY

USED.

Table of Contents