Digital Camera Scanning; Using The Rs507 Hands-Free Imager; Datawedge; Enable Datawedge - Motorola MC67 User Manual

3 - 4 MC67 User Guide

Digital Camera Scanning

To read a bar code, a scan-enabled application is required. The MC67 contains the DataWedge application
that allows the user to enable the camera, decode the bar code data and display the bar code content.
Enable DataWedge. See
1.
Launch an application that supports text inputs, such as Word Mobile 2010 or Excel Mobile 2010.
2.
Point the camera lens on the back of the MC67 at a bar code.
3.
Camera Scanning
Figure 3-4
Press and hold
4.
MC67. The Data Capture LED lights red indicating that the data capture is in process.
Move the MC67 until the red aiming line is across the bar code.
5.
The light emitting diode (LED) lights green and a beep sounds, by default, to indicate the bar code was
6.
decoded successfully.
The bar code content data displays in the text field.
7.

DataWedge

Enable DataWedge

To enable DataWedge:
Tap > Settings > System > DataWedge.
1.
Tap Basic configuration.
2.
Tap 1. Barcode input.
3.
Tap one of the following:
4.
1. Block Buster Imager (for scanning using the imager).
a.
2. Camera Scanner Driver (for scanning using the camera).
b.
3. Bluetooth SSI Scanner Driver (for scanning using the RS507, see
c.
Imager on page
Enable DataWedge on page
. A preview window appears on the display window and a red aiming line emits from the
10-19).
3-4.
Using the RS507 Hands-free