Test Strip Ejector Function; Reviewing Your Results; Reviewing Your Blood Sugar; Reviewing Your Averages - Infopia GluNEO Lite Instructions For Use Manual

Test Strip Ejector Function

Disposing of your test strip
1. Once the test is complete, push the test strip forward to
remove the test strip from the meter
2. Used test strips may be considered bio hazardous waste
in your area.
Be sure to contact your local representative for proper
disposal.
Disposing of your lancet
1. Push the needle into the protective cover.
2. Pull the lancet out and discard accordingly.
CAUTION
1. Pushing the ejector button too hard could cause a damage to the meter.
2. Do not give strong impact to blood glucose test meter.
3. Please follow the waste disposal regulations on the used lancets and strips imposed
by your local authorities.
• 26 •

Reviewing Your Results

®
The GluNEO Lite meter stores up to 365 test results in its built-in memory, along with the
average sugar level for the number of days, which you had preset the glucose test meter to
calculate.

Reviewing Your blood sugar

Press and release button. The most recent result appears first. Note the time and day
of your blood sugar result. Press and release the ▼ button and your previous result will
appear on the display

Reviewing Your averages

Press and release the ▲ button, and your average result will be displayed.
Average Test Result
Test Unit
Test Result Amount
Average Test Result Days
• 27 •