Aligning Automatically And Cutting - Roland VersaCamm VS-640 User Manual

Aligning Automatically and Cutting

When you make the setting for reading crop marks when sending cutting data from the computer, alignment
is performed with the presence or absence of crop marks determined automatically. For information on how
to make the setting, refer to the documentation for the software RIP you're using.
Points for Media Setting
Place the crop marks on the blade protector.
Angled no more than 5 degrees. Otherwise alignment becomes impossible.
Crop marks
Performing Printing and Cutting Separately
Blade protector
Set to 5° or less.
4
125