Connection Status; Dhcp Server; Dhcp Settings; Dhcp List And Binding - Teltonika RUT600 User Manual

7. Connection Status

This page shows wireless client equipment connection status, including MAC address,
Channel bandwidth, etc.
MAC Address: Shows current MAC addresses of the hosts connected to the
Router.
Bandwidth: Shows current frequency bandwidth the wireless client equipment
uses.

5.5 DHCP Server

1. DHCP Settings

DHCP (Dynamic Host Control Protocol) is used to assign an IP address to the computers
on the LAN/private network. When you enable the DHCP Server, the DHCP Server will
automatically allocate an unused IP address from the IP address pool and will assign it to
the client equipment automatically. Hence, you need to specify the starting and ending
address of the IP Address pool.
DHCP Server: Activate the checkbox to enable DHCP server.
IP Address Start/End: Enter the range of IP address pool for DHCP server
distribution.
Lease Time: The duration of the IP address lease.

2. DHCP List and Binding

The Static IP assignment is used to add a specific static IP address to the certain MAC
address. You can view the related information in the DHCP server list.
IP Address: Enter the IP address which needs to be bounded.
MAC Address: Enter the MAC address of the computer you want to assign the
above IP address. Click "Add" to add the entry to the list.
Hostname: The name of the computer you wish to add the IP address.
Lease Time: The duration of the IP address lease.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
22