Url Filter Settings; Mac Address Filter; Prevent Network Attack - Teltonika RUT600 User Manual

Port No.: Enter the port range based on the protocol for access policy.
Protocol: Select the desired protocol (TCP/UDP/Both) from the drop-down
menu.
Time: Select the time range for client filter to be enabled.
Days: Select the day(s) to run the access policy on.

2. URL Filter Settings

In order to control computers' access to websites, you can use URL filtering. This way you
can allow or forbid access to certain websites at the time you set.
URL Filter: Check to enable URL filter.
Access Policy: Select the desired from the drop-down menu.
Enable: Check to enable the access policy.
Delete the Policy: Click "Clear" button to clear all the settings for the policy.
Filtering Mode: Check the corresponding radio button in order to enable or
disable the Internet access.
Policy Name: Enter a name for the selected access policy.
Start/End IP: Enter the starting/ending IP address.
URL Strings: Specify the text strings or keywords needed to be filtered. If the
URL contains these, the web page will not be accessible and displayed.
Time: Select the time range for the filter to be enabled.
Days: Select the day(s) to run the access policy on.
Apply: Click "Apply" for the settings to take effect.

3. MAC Address Filter

In order to better manage the computers in LAN, you can control the network computers'
access to Internet using MAC Address Filter.
MAC Address Filter: Check to enable MAC address filter.
Access Policy: Select the desired from the drop-down menu.
Enable: Check to enable the access policy.
Delete the Policy: Click "Clear" button in order to clear all settings for the policy.
Filtering Mode: Check the corresponding radio button in order to enable or
disable the Internet access.
Policy Name: Enter a name for the access policy selected.
MAC Address: Enter the MAC address you want to run the access policy for.
Time: Select the time range for the filter to be enabled.
Days: Select the day(s) to run the access policy on.
Apply: Select "Apply" for the settings to take effect.

4. Prevent Network Attack

This section allows protection of the internal network from external attacks such as SYN
Flooding attack, Smurf attack, LAND attack, etc. Upon detection of the unknown attack,
the Router will reject the traffic automatically.
You will find the attacker's IP address in the "System Log".
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
27