Wlan Setting; Basic Settings - Teltonika RUT600 User Manual

5.4 WLAN Setting

1. Basic Settings

Enable Wireless: Check to enable the Router's wireless features; uncheck to
disable it.
Network Mode: Select one mode from the following. The default is 11b/g/n
mode.
11b mode: Allows the wireless client equipment to be connected to the device in 11b
11g mode: Allows the 11g/11n-compliant client equipment to be connected to the AP
11b/g mode: Allows the 11b/g-compliant client equipment to be connected to the
11b/g/n mode: Allows 11b/g/n-compliant client equipment to be connected to the
Main SSID: SSID (Service Set Identifier) is the unique name of the wireless
network. This device has two SSID's and the main SSID is necessary.
Minor SSID: It is optional.
Broadcast (SSID): Select "Enable" to enable the device's SSID to be visible by
wireless client equipment. It is Enabled by default.
MBSSID AP Isolation: the access control feature based on wireless MAC
address. When this feature is enabled, wireless client equipment connected to the
same SSID cannot communicate with each other. For example, configure main
SSID as AP1, minor SSID as AP2. Connect PC1 and PC2 to AP1 via wireless
adapter, and configure PC1 and PC2 in the same segment. After the feature is
enabled, two PCs cannot communicate and share network resources with each
other, but they can communicate with wireless clients connected with AP2.
AP Isolation: the access control feature based on SSID. When this feature is
enabled, each of your wireless clients will be in its own virtual network and will not
be able to communicate with each other. When this feature is enabled, wireless
clients connected to the Main SSID and Minor SSID will not be able to
communicate with each other, which can secure the wireless network strongly. For
example, configure main SSID as AP1, minor SSID as AP2. Connect PC1 to AP1
via wireless adapter; connect PC2 to AP2. After the feature is enabled, two PCs
will not be able to communicate and share network resources with each other. This
feature is to isolate the communication of wireless clients connected with different
SSID.
Tip: If you want to isolate all connected wireless client equipment communication,
please enable MBSSID AP Isolation and AP Isolation simultaneously.
BSSID: Basic Service Set Identifier of wireless network. In IEEE802.11, BSSID is
the MAC address of wireless access point.
Standard Channel: Specify the used channel (from 1 to 13 or Auto) for the
wireless network.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
mode at the maximum speed of 11Mbps.
at the maximum speed of 54Mbps.
AP with auto-negotiation speed, and 11n wireless client equipment to be
connected to the device with 11g speed.
AP with auto-negotiation speed.
17