Wps Settings - Teltonika RUT600 User Manual

BG protection Mode: the default value is "Auto". It is used for 11b/g wireless
client equipment to connect to 11n wireless network smoothly in a complicated
wireless area.
Basic Data Rates: Depending on requirements, you can select one of the suitable
Basic Data Rates. The default value is (1-2-5.5.-11Mbps...). It is recommended not
to modify this value.
Beacon Interval: Set the beacon interval of wireless radio. Default value is 100. It
is recommended not to modify this value.
Fragment Threshold: The fragmentation threshold defines the maximum
transmission packet size in bytes. The packet will be fragmented if its size exceeds
the threshold settings. The default size is 2346 bytes. It is recommended not to
modify this value.
RTS Threshold: RTS stands for "Request to Send". This parameter controls what
data packet size the frequency protocol issues to RTS packet. The default value of
the attribute is 2346. It is recommended not to modify this value in SOHO (small
office and home) environment.
TX Power: Set the output power of wireless radio. The default value is 100.
WMM Capable: It will enhance the data transfer performance of multimedia data
when they're being transferred over wireless network. It is recommended to enable
this option.
APSD Capable: It is used for auto power-saved service. The default is disabled.

4. WPS Settings

WPS (Wi-Fi Protected Setting) can be used for easy and quick connection setup between
the wireless network client equipment and the device through encrypted contents. The
users only enter PIN code or press WPS button on the panel to configure it without
selecting encryption method and secret keys manually.
WPS settings: Is used to enable or disable WPS function. The default is
"Enable".
WPS mode: Provides two ways: PBC (Push-Button Configuration) and PIN code.
PBC: Select the PBC or press the WPS button on the front panel of the device for
about one second. WPS indicator will be blinking for 2 minutes, which means the
WPS is enabled. During the blinking time, you can enable another device to start
the WPS/PBC negotiation between them. Two minutes later, the WPS indicator
will be off, which means the WPS connection is completed. If additional client
equipment is added, repeat the above steps. WPS supports up to 32 clients access.
PIN: If this option is enabled, you will need to enter a wireless client equipment
PIN code in the field.
WPS Summary: Shows the current state of Wi-Fi protected settings, including
authorized mode, encryption type, default key and other information.
WPS Current Status: Idle means WPS is in idle state. Start WSC process means
the process has been started and waits for being connected. Configured means the
negotiation is successful between server and client equipment.
WPS Configured: "Yes" means WPS feature is enabled and is effective. "Not
used" means it is not used.
WPS SSID: Shows the main SSID set by WPS.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
20