Mac Address Clone - Teltonika RUT600 User Manual

3g wireless-n router
Hide thumbs Also See for RUT600:
Table of Contents

Advertisement

Connect Automatically: Connect automatically to the Internet after rebooting
the system or on connection failure.
Connect Manually: Connect to the Internet manually.
Connect on Demand: Re-establish your connection to the Internet after the
specific time (Max Idle Time). Zero means your Internet connection is ON all the
time. Otherwise, enter the minutes to be elapsed before you want to be
disconnected from the Internet.
Connect on Fixed Time: Connect to the Internet during the time you set.
Notice:
The "Connect on Fixed Time" can be used only when you have set the current time in
"Time Settings" in "System Tools".
Static IP
address information.
IP Address: Enter the WAN IP address as provided by your ISP.
Subnet Mask:
Gateway: Enter the WAN Gateway here.
Primary DNS Server: Enter the Primary DNS server as provided by your ISP.
Secondary DNS Server: Enter the secondary DNS.
For PPTP and L2TP connection settings please refer to the "Wizard Setup" in chapter 5.
3G Broadband:
Network settings
PIN code: SIM card personal identification code. Enter as provided by your ISP.
Access Point Name: Enter as provided by your ISP.
Dial: Enter dialing number as provided by your ISP (default is *99#).
Advanced PPP Settings
User Name: PPP Authentication User Name.
Password: PPP Authentication Password.
After configuring the settings correctly, click "Apply" button and wait for 60 seconds.
Then you can access the Internet.
Note: Please enter the correct parameters according to the requirements of your ISP. After
finishing and saving the settings, please check the connection status on the status page.

3. MAC Address Clone

This page is used to set the Router's MAC address for WAN.
Some ISPs require end-user's MAC address to access their network. This feature copies the
MAC address of your network device to the Router.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
If the static IP is chosen for your connection, you can modify the following
Enter the WAN Subnet Mask here.
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents