Backup/Restore Settings; Restore To Factory Default Settings; Firmware Upgrade - Teltonika RUT600 User Manual

3. Backup/Restore Settings

The device provides backup/restore settings, so you need set a directory to keep these
parameters.
Backup Settings: Click "Backup" button to back up the Router's settings. Select
the path to save the configuration file to.
Click "Save" to save the configuration file.
Restore Settings: Press "Browse" button to locate the backup files.
Select the needed configuration file and press "Restore" button to restore your saved
settings.

4. Restore to Factory Default Settings

This function is used to reset all settings to the default (factory) values. This means the
Router will lose all the settings you have set. So please write down the settings if necessary.
Restore: Press this button to restore the settings to the default values.
Factory Default Settings:
Username: admin
Password: admin
IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0
Note: Please restart the device to roll back to the default settings.

5. Firmware Upgrade

The Router provides the firmware upgrade (update) capabilities.
Browse: click this button to locate and select the firmware upgrade (update) file.
Upgrade: press this button to start updating. After the upgrade is completed, the
Router will reboot automatically.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
30