Wan Medium Type; Setup Wizard; G Broadband Connection; Wired Broadband Connection (Wired Wan) - Teltonika RUT600 User Manual

5.1 WAN Medium Type

3G broadband by your ISP to access the Internet, you can connect the 3G USB modem
card to the Router's USB port and select 3G WAN to set the device. If you are provided
with the wired WAN access broadband such as ADSL Modem, Cable Modem or ISP
broadband access line, you can connect the access line directly to the WAN port on the
Router's rear panel. In addition, if you are provided with the wireless broadband by your
ISP, you can access the Internet conveniently.
3G WAN: If you have a 3G USB modem card and you want to share 3G Internet,
please select this type.
Wired WAN: In this type the WAN link line must be wired. Please connect the
access line to the WAN port on the Router's rear panel. The default type is wired
WAN.
Wireless WAN: If you are provided with the wireless WAN to access the Internet
or you want to amplify the wireless signals, you can use this type.
provided by your ISP. After saving and rebooting the device, you can enter the "Setup
Wizard" menu to set the connection type.

5.2 Setup Wizard

1. 3G Broadband Connection

please select "3G WAN" in "WAN Medium" after you enter the Router's Web-interface.
the basic parameters provided by your 3G ISP.

2. Wired Broadband Connection (Wired WAN)

Internet, please select "Wired WAN" in the "WAN Medium" setup page after you enter
the Router's Web-interface. It takes effect after saving and rebooting the device.
Dynamic IP, static IP, etc. If you are not sure of your access way, you can enable the auto-
detect function to select your access way.
ADSL Virtual Dial-up (via PPPoE).
Enter the Account and Password provided by your ISP and click "Next".
Dynamic IP (via DHCP).
If your connection mode is Dynamic IP, it means your IP address keeps changing
every time you connect. You do not need to enter the information like for other
modes. Click "Next" and "Apply" to save the settings.
Static IP.
In this screen, fill the network address information from your ISP in the IP
address, Subnet Mask, Gateway and Primary DNS server fields and click "Next".
Click "Apply" to complete the setup wizard. The Router will save the settings you
made. To activate the settings, it is recommended to select "Reboot the Router"
from the "System Tools" on the left menu. Please, DO NOT power off the router
during the reboot.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
The Router provides three access medium types. If you are provided with the
Please select the appropriate WAN medium type according to the access way
If you have a 3G USB modem card and you want to share 3G Internet,
During the installation, please select the type of 3G modem card and enter
If you are provided with the wired broadband by your ISP to access the
The Router supports multiple access ways such as ADSL PPPOE Dial,
13