Url Monitor; Security Settings; Client Equipment Filtering Settings - Teltonika RUT600 User Manual

5.8 URL Monitor

1. URL Monitor
This feature is used to track users' Internet activity.
Enable URL Monitor: After checking this feature, the Router will record LAN
computer's URL information, including the visited Websites, LAN IP addresses
and time. The Router can store up to 500 entries. After 500 entries, the counter
will clear all the records and will restart the URL tracking again. If the Router is
powered off and restarted, the records will be also lost. By default is disabled.
Enable Email: When enabled, the URL records will be sent to the specified e-
mail. This can be used as a workaround for saving the records without loosing
them.
Receiving E-mail Address: Enter the e-mail address you wish to receive the
messages to.
SMTP Server Address: Enter the SMTP server address here.
Sending Email Address: Enter the e-mail address you wish to send from.
Username: Enter the username for the e-mail account you wish to send from.
Email Password: Enter the password for the e-mail account you wish to send
from.
Time Triggering Interval: is used to set e-mail sending time interval. The time
can vary from 30 to 1440 minutes.
Example: if you set "30" for time triggering interval, the Router will be sending e-mail
messages from "Sending Email Address" to "Receiving Email Address" every 30
minutes. After the message is sent the device will clear all the records and will start the
logging again.
Entry Triggering Interval: To set e-mail sending based on entry number. The
entries number can vary from 100 to 500.

5.9 Security Settings

1. Client Equipment Filtering Settings

In order to better manage the network computers, you can use data packet filter function.
Client Equipment Filtering: Check to enable client filter.
Access Policy: Select one from the drop-down menu.
Enable: Check to enable the access policy.
Delete the Policy: Click "Clear" button to clear all settings for the selected policy.
Filtering Mode: Check the corresponding radio button in order to enable or
disable the Internet access.
Policy Name: Enter a name for the selected access policy.
IP Start/End: Enter the starting/ending IP address.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
26