Setting Up Your Router; Installation; Front Panel And Back Panel; Connection Status Led - Teltonika RUT230 User Manual

3 Setting up your router

3.1 Installation

After you unpack the box, follow the steps, documented below, in order to properly connect the device. For better
Wi-Fi performance, put the device in clearly visible spot, as obstacles such as walls and door hinder the signal.
1. First assemble your router by attaching the necessary antennas and inserting the SIM card.
2. To power up your router, please use the power adapter included in the box. (IMPORTANT: Using a different power
adapter can damage and void the warranty for this product.).
3. If you have a wired broadband connection you will also have to connect it to the WAN port of the router.

3.1.1 Front Panel and Back Panel

1 LAN Ethernet ports
2 WAN/LAN Ethernet port
3 LAN LED
4 WAN LED
5 Power connector
6 Power LED
7 Signal strength indication LEDs
8 SIM card holder
3.1.2 Power connector
No. Description
2 Power
3 Ground
4 Input
5 Output

3.1.3 Connection status LED

Explanation of connection status LED indication:
1. Signal strength status LED's turned on: router is turning on;
2. 2G and 3G LED's constant blinking every 1 sec: no SIM or bad PIN;
3. 2G/3G LED's blinking every 1 sec: connected 2G/3G, but no data session established;
4. Blinking from 2G LED to 3G LED repeatedly: SIM holder not inserted;
5. 2G/3G LED turned on: connected 2G/3G with data session;
6. 2G/3G LED blinking rapidly: connected 2G/3G with data session and data is being transferred.
1 Wi-Fi antenna connectors
2 3G main antenna connector
3 Reset button
Wire color
Red
Black
Green
White