Wan - Teltonika RUT750 LTE User Manual

Warning: If an invalid PIN number was entered (i.e. the entered PIN does not match the one that was used to protect
the SIM card), your SIM card will get blocked. To avoid such mishaps it is highly advised to use an unprotected SIM. If
you happen to insert a protected SIM and the PIN number is incorrect, your card won't get blocked immediately,
although after a couple of reboots OR configuration saves it will.

WAN

WAN configuration is, arguably, the crux of the routers configuration as it determines how the router will connect to the
internet. Here is quick rundown of how the page looks and what each field means.
Operation Mode
First and foremost a mode of connection has to be defined. Available selections:
Type Description
1. Wired An Ethernet cable connected to the WAN port of the router.
2. Wifi The router will be able to connect to a local wireless access point and reach the internet through it.
3. LTE The router will connect to your local mobile network for LTE access.
Common configuration
Common configuration allows you to configure your TCP/IP settings for the wan network.
You can switch between the Static, DHCP or PPPoE protocol by selecting the protocol that you want to use and then
pressing Switch Protocol
automatic. (2G), UMTS (3G) and LTE (4G) you can specify to which network you
wish to connect. E.g.: if you choose GSM (2G), the router will connect
to a GSM (2G) network, so long as it is available, otherwise it will
connect to a LTE (4G) network. If you select auto, then the router will
connect to the network that provides better connectivity.
23