LeMond Revolution 250202-2 Owner's Manual page 10

6. I nse rt the skewer into the body assembly from the fan side and thread the acorn nut onto the
skewer on the cassette side. (Figure 1.4) Do not fully thread the acorn nut in place to allow for bike
mounting.
Note: Ensure the spacer is installed on the fan side of the unit and that both springs are present on the skewer
as shown in Figure 1.4.
7.
stability. (Figure 1.5)
Note: Handle the unit by lifting from the base assembly, NOT the fan cover or the belt wheel.
WARNING: IF THE LEVELING FEET ARE NOT SET PROPERLY IT CAN RESULT IN AN UNSTABLE
!
BASE FOR THE UNIT AND LEAD TO PROPERTY DAMAGE OR RIDER INJURY.
ASSEMBLY INSTRUCTIONS
FIGURE 1.4
FIGURE 1.5
10