Page 3
CONGRATULATIONS! CONGRATULATIONS You have just become a valued LeMond fitness customer. Our team is committed to making your cycling experience fun and rewarding — offering you detailed product information, expert fitness advice, and direct customer support you can depend on. I want to thank-you for purchasing an exciting LeMond RevMaster Sport indoor group cycle.
Page 4
RevMaster Sport We are confident that you will love your new . From Greg and the whole LeMond Fitness team, we wish you a lifetime of good rides and great workouts.
WARRANTY Warranty This is to certify that the LeMond® RevMaster Sport™ exercise bike is warranted by LeMond Fitness Inc. to be free of all defects in materials and workmanship. This warranty does not apply to any defect caused by negligence, misuse, accident, alteration, improper maintenance, or an “act of God. ”...
Wait for the flywheel to coast to a stop. If you want to quickly stop the flywheel, apply firm down- ward pressure to the brake knob. Do not attempt to dismount the RevMaster Sport unless the pedals and the flywheel are at a complete stop.
Page 8
(and possibly others) to injury, and reduce the longevity of the equipment. SAVE THESE INSTRUCTIONS Your Serial Number: ____________________________________________________________________________________ Your LeMond Fitness: Dealer: _____________________________________________________________________________ Phone: _____________________________________________________________________________ Your comments and suggestions are welcome. Congratulations, and thank you for buying the RevMaster Sport.
LeMond RevMaster Sport ASSEMBLY AND INSTALLATION Before leaving the manufacturing facility, your LeMond® RevMaster Sport® exercise bike was thoroughly inspected and tested for proper operation. To minimize shipping damage, careful attention was given to making your bike ready for shipment.
Page 10
ASSEMBLY INSTRUCTIONS DELIVERY Your LeMond RevMaster Sport will arrive packed in 1 carton. Upon arrival fully inspect the carton for damage. Point out any damage to the delivery person and have the delivery person record the damage on the delivery paperwork. Contact the Customer Service Department at (425) 482-6773 to report any damage.
Page 11
ASSEMBLY INSTRUCTIONS Assembly Parts REMOVE ThE BIkE AND COMpONENTS FROM ThE ShIppING CARTON Move the box to the desired location. Ensure that the carton is standing upright and remove the strapping material. Pull the cardboard edge out along the bottom of the box to remove the staples. Lift the top of the box up and set aside.
Page 12
ASSEMBLY INSTRUCTIONS Position the seat assembly atop the seat track on the seat post. Lightly grease the end of the threads on an adjustment lever. Loosely thread the adjustment lever through the brass washer, through the hole in the seat track, and into the seat assembly. Slide the seat to the desired position and tighten the adjustment lever.
Although all equipment manufactured by LeMond® Fitness, Inc. has been thoroughly inspected by the manufacturing facility prior to shipment, proper installation and regular maintenance are...
Your First Workout On The LeMond® RevMaster Sport™ AdjuSting the fit Take a moment to learn how to properly fit your RevMaster Sport to your body; it will make your work- outs a more pleasant and safer experience. The RevMaster Sport provides more seat and handlebar adju- stability than any other indoor group cycle, and each adjustment is numbered so you can quickly return the adjustments to your specific settings.
Page 15
OpERATING INSTRUCTIONS justment. The seat adjustment lever can be attached to either. Taller users may want to use the front hole; shorter users may want to use the back hole. handlebar Adjustment: Adjusting the handlebar height Handlebar height is a matter of preference. Start with the handle bars at the same height as the seat.
GENERAL EXERCISE GUIDELINES BASic OPeRAtiOn Now that you have established a riding position, take a few minutes to ride the bike and determine that your position is comfortable. Start pedaling at a slow pace with your toes and knees pointed directly forward.
GENERAL EXERCISE GUIDELINES fLeXiBiLitY tRAining* Achieving and maintaining an adequate range of motion should always be objectives of a comprehen- sive exercise program. The warm-up phase of your exercise session should include some type of light warm-up activity to increase both your heart rate and your body temperature, which is then followed by flexibility exercises that are specifically designed to stretch the musculature around your body’s major skeletal joints.
MAINTENANCE MAINTENANCE INSTRUCTIONS heLPfuL hintS The safety level given by the design of this equipment can only be maintained when the equipment is regularly examined for damage and wear. Inoperable components should be replaced immediately or the equipment should be put out of use until it is repaired. Read all maintenance instructions thoroughly before beginning work.
MAINTENANCE MAintenAnce ScheduLe PARt RecOMMended ActiOn fReQuencY cLeAneR LuBRicAnt Pedals Ensure that the pedals are tight Before each use N/A in crank arms; that all screws on pedals are tight; and that the pedal straps are not frayed Frame Wipe down Daily Soap &...
TROUBLEShOOTING TROUBLEShOOTING SYMpTOM: Clicking noise with each pedal revolution. Check shoelaces to make sure the aglet is not tapping the bike as the pedals turn. Assure pedal straps are tight and that no excess strap on inner part of pedal is catching on the crank arm as it turns.
Page 21
TROUBLEShOOTING SYMpTOM: Rocking or movement from RevMaster Sport while in use. Using a 5mm hex wrench, check the attachment bolts on the front and rear stabilizers and make sure they are tight. Assure the bike is level by checking the leveling feet on the bottom of the front and rear stabilizers.
SpECIFICATIONS 42.0 in (min) 23.0 in 41.4 in PhYSicAL diMenSiOnS: Shipping carton dimensions: Length: 41.4 in (105 cm) Length: 40 in (101.6 cm) Weight: 42 in (106.7 cm) height: 33 in (83.8 cm) Width: 23 in (58.4 cm) Width: 8 in (20.3 cm) Weight: 114 lbs (51.7 kg) Weight: 133lbs (60.3 kg)
Page 23
SpECIFICATIONS fRAMe: SeAt: • Welded X Style frame • Up/down and fore/aft adjustability with position indicator marks • ED and powder coated finish • Dual position seat slider for extended fore/ • 22 inch wide base with large diameter ad- aft adjustment justable levelers •...